Table of Contents
Advertisement
Perform the following steps to assign MultiCalls to alarms.
1.
Press Shift F10.
2.
Press A for Alarm Inputs.
3.
Enter the alarm number (0-255) to be assigned to a MultiCall and
press Enter.
The alarm number entered is the first number appearing in the upper left
corner of the screen. Twenty-seven alarm numbers appear on the
screen at a time.
The NUM column is the alarm number and the MC column is the
MultiCall Number (0-255) to be assigned to the alarm input.
4.
Enter the MultiCall number to be assigned to the alarm in the MC
column (to the right of the alarm number).
5.
Continue assigning MultiCalls to alarms.
There are several ways to view additional alarm numbers.
a)
Press the Esc key and enter another alarm number;
If MultiCalls have been assigned to alarms,
you
must
assignments before pressing Esc.
b)
Press the gray page up key to go to the top of the previous page of
alarms.
c)
Press the gray page down key to move to the top of the next page
of alarms.
d)
Use the gray arrow keys to move to the next page or the previous
page by scrolling off the current page.
CAUTION
press
Enter
to
ASSIGNING MULTICALLS
save
the
4-21
Advertisement
Table of Contents
