Table of Contents
Advertisement
A.2
PROGRAMMING RECOMMENDATIONS
The following steps are recommended to organize the programming efforts of the
SmartScan System.
1.
Identify and program all SmartScan Units and maintain a log for each unit.
2.
Identify the contents of MultiCalls for each JPD-100 function key (quick switch).
3.
If using AIU-100s, identify alarm monitors and alarm VCRs and their associated
Aux #. Enter on worksheet.
4.
If using AIU-100s, assign MultiCall #'s to each alarm on each AIU unit (one
MultiCall can be assigned to one or more alarms)
5.
If using SHB-100s identify contents of MultiCalls for each function key (quick
switch).
6.
Identify and program all other MultiCalls desired such as monitor sequences.
A-7
Advertisement
Table of Contents
