Appendix B. Programming Aif-100 Alarm Inputs; General; Aif-100/In Alarm Input Auxiliary Interface Unit - Ultrak CCU-100HD User Manual

Central control unit

Table of Contents

APPENDIX B. PROGRAMMING AIF-100 ALARM INPUTS

B.1

This appendix provides the programming information for the AIF-100/IN Alarm

Input Auxiliary Interface Unit, the AIF-100/AL Alarm Input Auxiliary Interface Unit,

and the AIF-100/IO Alarm Input/Contact Output Auxiliary Interface Unit. The

AIF-100/IN unit can be wired directly to the CCU-100 Central Control Unit and

operates the same as an AIU-100 Alarm Interface Unit. The AIF-100/AL and

AIF-100/IO units must be wired to an AIF-100/CI CCU Auxiliary Interface Unit for

communication with the CCU-100 Central Control Unit.

The programming menus on the CCUs are designed for use with AIU-100 Alarm

Interface Units. Each AIU-100 unit has thirty-two alarm inputs. Up to eight AIU-

100 units can be daisy-chained together to provide a total of up to 255 alarm

inputs. The same menus used for programming AIU-100 Alarm Interface Units

are used for programming the AIF-100/IN, AIF-100/AL, and AIF-100/IO alarm

inputs. So the programmer has to know the equivalency between the AIF-100

units and the AIU-100 units. The following paragraphs explain the equivalencies

between the different units and provide the steps for programming the alarm

inputs. Examples are given for assistance during programming.

B.2

One AIF-100/IN Alarm Input Auxiliary Interface Unit is equivalent to one AIU-100

Alarm Interface Unit. Each AIF-100/IN has eight alarm inputs. Alarm inputs nine

through thirty-two on the programming menu are not used or programmed. The

CCU-100 Central Control Unit supports the programming for up to eight AIF-

100/IN Alarm Input Units. Up to a total of eight AIF-100/IN Alarm Input Auxiliary

Interface Units and AIU-100 Alarm Interface Units can be daisy-chained

together.

Each unit must be given a unique address between 0 and 7 for

programming of alarm inputs.

B-1

Table of Contents