C - Call - Ultrak CCU-100HD User Manual

PROGRAMMING MULTICALLS
4-12
4.3.3.4

C - Call

The Call function provides four system actions.
1.
2.
3.
4.
CALL A CAMERA TO A MONITOR
To program the MultiCall to switch a camera to a monitor, perform
the following steps.
Call a camera to a monitor
Call a camera to an alarm monitor (AM)
Call a camera to an alarm VCR (AR)
Automatically Acknowledge an Alarm (AA)
If the MultiCall is started from the KBD-100A
keyboard, a SHB-100 function key, a JPD-100
function key, the JPD-100 keypad, or date and
time, the alarm monitor, alarm record, and
alarm acknowledge steps of a MultiCall are not
processed by the CCU. These steps are only
processed if the MultiCall is started by an
alarm.
If the cursor does not automatically move to
the next field after entering data in a field,
press the right gray arrow key to move to the
next field.
NOTE
NOTE