Table of Contents
Advertisement
4.3.6
Run MultiCall
A.
KBD-100A Keyboard
To run a MultiCall from the KBD-100A keyboard, perform the following
steps.
1. Press function key F4.
2. Enter the MultiCall number (0-255).
3. Press Enter.
B.
JPD-100 Controller
A MultiCall can be controlled (started, stopped, placed on hold or
continued) from the JPD-100.
manual for all JPD-100 MultiCall control procedures.
4.3.7
Stop MultiCalls
To stop all MultiCalls currently running, a JPD-100 joystick controller must be
used.
1.
Press MCALL.
2.
Press 3 to STOP ALL.
The CCU sends out the data to run the steps in the MultiCall.
START/STOP MULTICALLS
Refer to the JPD-100 Controller
4-19
Advertisement
Table of Contents
