Stamp Position And Original Orientation; To Change The Stamp Position, Size, And Density - Ricoh C280 Manual

Stamp position and original orientation

1. Place the originals.
2. Press [Edit Image].
3. Press [Preset Stamp].
4. Select the message.
5. Press [All Pages] or [1st Page Only] to select the print page.
6. After you have specified all necessary settings, press [OK].
7. Press [OK].
8. Press the [Start] key.

To change the stamp position, size, and density

1. Press [Change].
2. Select the position for print, size, and density, and then press [OK].
GCSTMP5E
Preset Stamp
109