Table of Contents
Advertisement
Section 700 - Operation
7. Press the HOLD key.
8. Enter the destination extension.
9. Press the HOLD key to store the entry.
10. To set Call Forward Busy destinations for additional exten-
sions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
12. Press the AUTO key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Call Forward No Answer Destination Extension
Description
You can assign a Call Forward No Answer Destination Extension for each extension. This is typically
used for forwarding calls to voice mail.
Operation
To set a Call Forward Busy Destination Extension using either a large-display or small-
display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
Enter CODE displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
105
Advertisement
Table of Contents
