Set Call Forward No Answer Destination Extension - Panasonic DBS-576HD Technical Manual

Section 700 - Operation
Related Programming
• N/A
Considerations
• N/A

Set Call Forward No Answer Destination Extension

Description
You can assign a Call Forward No Answer Destination Extension for each extension. This is typically
used for forwarding calls to voice mail.
Operation
To set a Call Forward Busy Destination Extension using either a large-display or
small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the destination extension.
9. Press the HOLD key to store the entry.
10. To set Call Forward No Answer destinations for additional
extensions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
12. Press the AUTO key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
576-50-700
Action
DBS 576 (USA) issued September 2001
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
CFWD-NoANS Ext displays
Enter CODE displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
4-7