Error Messages; Status Messages - MUTOH ValueJet VJ-1626UH Operation Manual

VJ-1626UH OPERATION MANUAL
7.2

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
7.2.1

Status messages

This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display
1 Ready to Print
2 Media End
3 Receiving Data
4 Analyzing Data
5 Printing Data
6 Remain:XXX.Xm
7 Remain Time: Xmin
8 Cleaning **%
9 During Washing
10 Moving Origin Pos.
11 ** Initializing **
12 ** Press 2sec. **
13 [*******] S/C Reading
14 Ink Circulation
7.2 Error messages
Description
Standby (Media is loaded).
Standby (Media is not loaded).
Receiving data.
Analyzing data.
Under printing.
Displays the length of the data that has not
been printed in meters for the data currently
being printed.
Displays the time remaining to print in
minutes for the data currently being printed.
Cleaning the head.
Please wait a while.
• Initial filling, ejecting filler fluid.
• Washing the print head by cleaning fluid.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Please wait a while.
Initializing the setting in the Initialization
menu.
Please wait a while.
The [Cleaning] key or the [Nozzle Check] key
is pressed for less than 2 seconds.
Press the key for more than 2 seconds again.
Reading the S/C card.
Ink is circulating inside the printer.
7 Troubleshooting
Reference
—
3.5 Setting
media
—
—
—
4.4.6 Normal
Display while
Printing
4.4.6 Normal
Display while
Printing
6.5.3 Head
cleaning
3.4 Initial ink
filling
6.3 Before
using sleep mode
for a long time
5.3.4 Origin
menu
5.3.18 Initiali
zation menu
2.2.3 Operati
on panel
l
—
—
321