Origin Setup Menu - MUTOH Toucan Hybrid PJ-162-FE User Manual

5.4.2 Origin setup menu

Set printing start position (origin) for printing data.
Set this when you want to re-print to blank area of the printed media by changing the layout of the printing
data.
Parameters
Setup items
Origin setting • L: Media feed value
• W: Print head movement
value
(Unit: mm)
Setup items Parameters
Origin Set Origin Position Check
Confirm origin position and push
ENTER
Notes:
The print head automatically returns after none of keys are pressed for a certain period
(5 sec.) while checking the origin position, to avoid drying the print head.
* Origin
F1 →
Top
F3 →
Bottom
L : 000000
Origin Pos. Check
Confirm Origin Pos.
And push ENTER
← F2
Left
← F4
Right
W : 000000
Descriptions
Change print head position and media feed amount by
operating the following keys.
• [F1] key: Increase setup value L
• [F2] key: Increase setup value W
• [F3] key: Decrease setup value L
• [F4] key: Decrease setup value W
• [ENTER] key:
Determines the setup values.
The print head moves to drawing start point.
The following messages are displayed on the
operation panel.
Descriptions
[ENTER] key:
Determines the setup values.
The print head returns as before.
The operation panel returns to the normal status
123
User's Guide – Toucan Hybrid
AP-750, Rev. 1.1 –- 23/04/04