Origin Setup Menu - MUTOH Rockhopper II User Manual

Rockhopper II - User's Guide

4.4.3 Origin setup menu

Set printing start position (origin) for printing data.
Set this when you want to re-print to blank area of the printed media by changing the layout of the
printing data.
Setup items
Origin setting
NOTE
When printing from the data saved in the hard disk, the printing will start from the same printing start position as when
the printing data was written, regardless of the home position setting value.
TIP
•
The origin setup menu automatically ends after none of keys are pressed for a certain period, to avoid drying the
print head.
Parameters
• L: Media feed value
• W: Print head movement
value
(Unit: mm)
Descriptions
Change print head position and media feed amount by
operating the following keys.
• [F1] key: Feeds media forward.
• [F2] key: Moves the print head to the left.
• [F3] key: Feeds media backward.
• [F4] key: Moves the print head to the right.
• [ENTER] key: Determines the setup values then return to
the previous hierarchical menu.
4.4.1 Setup menu
4-11
4 Handling the printer