Table of Contents
Advertisement
5.7 OPERATIONS AFTER PRINTING
The operations performed after printing is described here.
Notes :
Always wear protective goggles. Operators as well as technicians and visitors have to
wear protective goggles whenever the infrared lamp is active. Not doing so will cause
serious permanent damage to your eyes
Do not touch the infrared lamp or infrared lamp house after or during operation. Doing
so may result in burns.
Please note that after operating the infrared lamp and infrared lamp house will keep their
temperature for several minutes. Let it cool off. Not doing so may result in burns.
5.7.1 Removing the rigid media
Rigid media removal is explained below.
Remove the media from the printer according to the following procedure.
Step 1 :
Check the following on the operating condition of the printer.
• Printing operation is not performed.
• Operation panel is in the normal state.
• MEDIA SET lamp on the operation panel is OFF.
Step 2 :
Press the [F2] key to raise the pressure rollers.
Step 3 :
Lift the print head by turning the head gap adjusting handle in the UP direction (clockwise).
No.
1
Name
Head gap adjusting handle
203
User's Guide – Toucan Hybrid
AP-750, Rev. 1.1 –- 23/04/04
Advertisement
Table of Contents
