2GN/2GP/2GR-1
Maintenance
item No.
Adjustment: main scanning direction of CIS
U070
1. Press the system menu key.
2. Place an original on the DP and press the start key to make a test copy.
3. Press the system menu key.
4. Change the setting value using the +/- or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
5. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U070
Adjustment: auxiliary scanning direction of CCD/CIS
1. Press the system menu key.
2. Place an original on the DP and press the start key to make a test copy.
3. Press the system menu key.
4. Change the setting value using the +/- or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
5. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U070
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-30
Original
U071
U404
(P.1-3-31)
(P.1-3-70)
Original
U071
U404
(P.1-3-31)
(P.1-3-70)
Description
Copy
Copy
example 2
example 1
Figure 1-3-12
Copy
Copy
example 2
example 1
Figure 1-3-13