Adjusting Margins For Scanning An Original From The Dp - Kyocera KM-3050 Service Manual

2GN/2GP/2GR-6
Maintenance
item No.

Adjusting margins for scanning an original from the DP

U404
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect when the optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U402
(P.1-3-68)
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
A MARGIN(BACK)
B MARGIN(BACK)
C MARGIN(BACK)
D MARGIN(BACK)
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the +/- keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-70
U403
U404
(P.1-3-69)
Description
Left margin (first page)
Leading edge margin (first page)
Right margin (first page)
Trailing edge margin (first page)
Left margin (second page)
Leading edge margin (second
page)
Right margin (second page)
Trailing edge margin (second
page)
Leading edge margin
(3±1.5 mm)
Left margin
(2±1.0 mm)
Description
Setting
range
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
Right margin
(2±1.0 mm)
Trailing edge margin
(2±1.0 mm)
Figure 1-3-26
Initial Change in
setting value per step
3.0 0.5 mm
2.5 0.5 mm
3.0 0.5 mm
4.0 0.5 mm
3.0 0.5 mm
2.5 0.5 mm
3.0 0.5 mm
4.0 0.5 mm