Checking The Operation Of The Finisher; Method: Checking The Motor Of The 3000-Sheet Document Finisher - Kyocera KM-3050 Service Manual

2GN/2GP/2GR-2
Maintenance
item No.

Checking the operation of the finisher

U240
Description
Turns each motor and solenoid of the 3000-sheet document finisher ON.
Purpose
To check the operation of each motor and solenoid of the 3000-sheet document finisher.
Method
1. Press the start key.
2. Select the item to be checked. The screen for executing each item is displayed.
Display
FINISHER MOTOR
FINISHER SOL
MAIL BOX
BOOKLET

Method: Checking the motor of the 3000-sheet document finisher

1. Select the item to be operated. The operation starts.
Display
FEED IN MOTOR M
FEED IN MOTOR L
CONV MOTOR H
CONV MOTOR M
CONV MOTOR L
EJECT MOTOR H
EJECT MOTOR M
EJECT MOTOR L
SUB PATH MOTOR H
SUB PATH MOTOR M
BUNDLE UP MOTOR
BUNDLE DOWN MTR
WIDTH TEST(A3)
WIDTH TEST(LD)
STAPLE FR MOTOR
STAPLE S MOTOR
STAPLE MOTOR
TRAY MOTOR
PUNCH MOTOR
PUDDLE MOTOR
2. To stop operation, press the stop key.
1-3-52
Description
Description
Checking the motor of the 3000-sheet document finisher
Checking the solenoid of the 3000-sheet document finisher
Checking the motor and solenoid of the mailbox
Checking the motor of the centerfold unit
Motor
Paper entry motor (PEM) is turned on counterwise.
Paper entry motor (PEM) is turned on clockwise.
Paper conveying motor is turned on at high speed.
Paper conveying motor is turned on at middle speed.
Paper conveying motor is turned on at low speed.
Eject motor (EJM) is turned on at high speed.
Eject motor (EJM) is turned on at middle speed.
Eject motor (EJM) is turned on at low speed.
Relief path motor (RPM) is turned on counterwise.
Relief path motor (RPM) is turned on clockwise.
Paper conveying belt motor 1 (PCBM1) is turned on.
Paper conveying belt motor 2 (PCBM2) is turned on.
Side registration motor 1/2 (SRM1/2) is turned on.
Side registration motor 1/2 (SRM1/2) is turned on.
Staple shift motor 1 (STSM1) is turned on.
Staple shift motor 2 (STSM2) is turned on.
Staple motor (STM) is turned on.
Main tray motor (MTM) is turned on.
Punch motor (PUNM) is turned on.
Paddle motor (PDM) is turned on.