Detaching And Refitting The Fuser Heater - Kyocera KM-3050 Service Manual

(4) Detaching and refitting the fuser heater

Follow the procedure below to replace the fuser heater.
Procedure
1. Remove the fuser unit (see page 1-5-30).
2. Remove the upper fuser cover (see page 1-
5-31).
3. Remove two screws and the connector.
4. Pull out the fuser heater from the fuser unit.
5. Replace the fuser heater and install the
heater to fuser unit.
6. Refit the upper fuser cover.
7. Refit the fuser unit.
Connector
Figure 1-5-67
Fuser heater
Figure 1-5-68
2GN/2GP/2GR-1
1-5-33