Setting: Density In Photo Mode - Kyocera KM-3050 Service Manual

Maintenance
item No.

Setting: Density in photo mode

U093
1. Select the item to be set.
2. Adjust the setting using the +/- or numeric keys.
Display
PHOTO DARKER
PHOTO LIGTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop key.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Change in density when manual density is set dark 0 to 3
Change in density when manual density is set light 0 to 3
2GN/2GP/2GR-6
Setting Initial
range setting
0
0
1-3-39