Maintenance
item No.
HDD formatting
U024
Description
Initializes the HDD.
In addition, the following settings are also initialized by initializing the HDD.
System menu (user login administration, job accounting, address book, one-touch keys and document box
etc.), shortcuts and panel programs
Purpose
To initialize the HDD when replacing the HDD after shipping.
Method
1. Press the start key.
2. Press [EXECUTE] on the touch panel.
3. Press the start key to initialize the hard disk.
4. Turn the main power switch off and on.
Checking motor operation
U030
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Display
FEED
MAIN
EJECT(FW)
EJECT(REV)
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking switches for paper conveying
U031
Description
Displays the on-off status of each paper detection switch on the paper path.
Purpose
To check if the switches for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch on and off manually to check the status.
When a switch is detected to be in the ON position, the display for that switch will be highlighted.
Display
FEED1
FEED2
FEED3
MP TRAY
REGIST
EJECT
BRANCH
DUPLEX
JOB SEPARATOR
*: Optional.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Operation
Paper feed motor operates
Drive motor operates
Eject motor rotates forward
Eject motor rotates in reverse
Switches
Feed switch 1 (FSW1)
Feed switch 2 (FSW2)
Feed switch 3 (FSW3)
MP feed switch (MPFSW)
Registration switch (RSW)
Eject switch (ESW)
Feedshift switch (FSSW)
Duplex paper conveying switch (DUPPCSW)
Job separator eject switch (JBESW)*
2GN/2GP/2GR-2
1-3-19