Checking The Operation Of The Switches Of The Finisher - Kyocera KM-3050 Service Manual

2GN/2GP/2GR-2
Maintenance
item No.

Checking the operation of the switches of the finisher

U241
Description
Displays the status of each switch of the 3000-sheet document finisher.
Purpose
To check the operation of each switch of the 3000-sheet document finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Display
FINISHER
MAIL BOX
BOOKLET
Method: Checking the switch of the 3000-sheet document finisher
1. Turn the respective switches on and off manually to check the status.
When a switch is detected to be in the ON position, the display for that switch will be highlighted.
Display
FRONT COVER SW
TOP COVER SW
RIGHT COVER SW
SET SW
BOOKLET SW
PUNCH TANK SW
TRAY L-LIMIT SW
TRAY U-LIMIT SW
TRAY MIDDLE SW
PAP HOLD DOWN SW
LOAD DET SW
FEED IN SW
EJECT SW 1
EJECT SW 2
EJECT SW 3
STAPLE HP SW 1
STAPLE HP SW 2
MIDDLE FEED SW1
MIDDLE FEED SW2
BUNDLE DET SW 1
BUNDLE DET SW 2
BUNDLE UP HP SW
BNDL DOWN HP SW
WIDTH HP SW 1
WIDTH HP SW 2
BUNDLE INTERF SW
VCARRY SW
1-3-54
Description
Description
Checking the switch of the 3000-sheet document finisher
Checking the switch of the mailbox
Checking the switch of the centerfold unit
Switches
Front cover switch (FCSW)
Top cover switch (TCSW)
Sub tray right switch (STRSW)
Joint switch (JSW)
Centerfold set switch (CSSW)
Punch waste box sensor (PWBS)
Main tray lower limit detection sensor (MTLLDS)
Main tray upper limit detection sensor (MTULDS)
Main tray middle position detection sensor (MTMPDS)
Paper holder home position sensor (PHHPS)
Main tray load detection sensor (MTLDS)
Paper entry sensor (PES)
Eject switch 1 (ESW1)
Eject switch 2 (ESW2)
Eject switch 3 (ESW3)
Staple home position switch 1 (STHPSW1)
Staple home position switch 2 (STHPSW2)
Internal tray paper entry sensor 1 (ITPES1)
Internal tray paper entry sensor 2 (ITPES2)
Paper detection sensor 1 (PDS1)
Paper detection sensor 2 (PDS2)
Paper conveying belt home position sensor 1 (PCBHPS1)
Paper conveying belt home position sensor 2 (PCBHPS2)
Side registration home position sensor 1 (SRHPS1)
Side registration home position sensor 2 (SRHPS2)
Paper conveying belt position detection sensor (PCBDS)
Centerfold paper conveying sensor (CPCS)