Kyocera KM-3050 Service Manual page 215

6. Remove two screws and remove the scan-
ner left cover.
7. Remove each screw and then remove front
and rear wire holder plates from mirror 1
frame.
8. Remove the mirror 1 frame.
9. Remove the round terminals from the scan-
ner wire springs on scanner unit left side.
10. Remove the scanner wire.
Scanner left cover
Figure 1-5-33
Mirror 1 frame
Front wire holder plate
Figure 1-5-34
Scanner wire springs
Round terminal
Figure 1-5-35
2GN/2GP/2GR
Rear wire holder plate
Round terminal
1-5-15