Kyocera KM-3050 Service Manual page 208

2GN/2GP/2GR-1
13. Remove the stop ring of the MP paper feed
pulley shaft and slide the bushing in the
direction of the arrow.
14. Slide the MP forwarding pulley shaft tempo-
rarily toward the rear side and then raise it to
remove from the MP unit.
Remove the shaft while raising the actuator
of the MP paper switch.
15. Remove the bushing and cam on the rear of
the MP forwarding pulley shaft.
1-5-8
Actuator
Cam
MP forwarding
pulley shaft
Bushing
Figure 1-5-20
Stop ring
Bushing
MP paper feed
pulley shaft
Figure 1-5-18
MP forwarding
pulley shaft
Figure 1-5-19