Host Pbx Access Codes - Panasonic KX-TD816 Installation Manual

411
Description
Selection
Default
Programming
4-86 System Programming
4.5 CO Line Programming

Host PBX Access Codes

Assigns Host PBX or Centrex access codes. If the system is
installed behind a host PBX or a Centrex system, an access code is
required to make a CO / Centrex call or to access Centrex features.
Up to four codes can be stored for a CO line group assigned the
line.
• CO line group (TRG) number: 1 through 8,
• Access code: 1 or 2 digits, four different entries (max.)
All CO line groups – Not stored
1. Enter 411.
Display : TRG Host PBX NO.
2. Press NEXT.
Display : TRK GRP NO?—>
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:
4. Enter an access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new access code.
Display example: TRG1:01,
5. To enter more access codes for the same CO line group, press
→ and enter the access codes until all the required entries are
completed.
Display example: TRG1:01,08,10,22
6. Press STORE.
7. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
8. Repeat steps 4 through 7.
9. Press END.
( =all CO line groups)
, , ,
, ,