System Programming And Diagnosis With Personal Computer - Panasonic KX-TD816 Installation Manual

S
S
ystem Programming and Diagnosis with Personal Computer
Description
Conditions
3-114 Features
This system can be programmed and administered using a personal
computer. The EIA/Remote Programming & Diagnosis floppy is
required to perform this feature. The KX-TD816 cannot perform
the diagnosis. There are two programming methods:
On-Site Programming
By connecting a personal computer (PC) to your system, system
programming and maintenance can be performed locally. There
are two ways available to perform the above:
(Method 1.) Using the EIA (RS-232C) port
Connect the PC to the EIA (RS-232C) port provided. The main
unit has an EIA (RS-232C) port which can be used for either
system administration or SMDR.
*(Method 2.) Using a modem
Install the optional Remote Card. Connect the PC to an extension
jack. Assign the floating number of the modem in System
Programming. Dial this number from the PC.
*Remote Programming
You can perform system programming and maintenance from a
remote site using a PC. Install the Remote Card and assign the
floating number of the modem in System Programming.
Starting system administration from a remote location can be done
in the following ways.
• Call an extension (probably the Operator) from a remote
location and request a transfer to the modem.
• Dial the floating number of the modem using the DISA
feature.
• Assign the modem as the destination of the DIL 1:1
feature.
• For KX-TD1232, the ROM version P011J and the ROM versions from
P011N require the Version 2.xx software for EIA/Remote
Programming and Diagnosis. Other ROM version models require
Version 1.xx software.
• For KX-TD816, all ROM version models require the Version 1.xx
software for EIA/Remote Programming and Diagnosis.
• A proprietary telephone can be used to perform System Programming.
• Only one access is allowed to System Programming at any one time.
• To access system administration, a valid password must be entered.
The password is factory-programmed and can be changed.
3 Features
*: Available for KX-TD1232 only.