Power Failure Restart; Power Failure Transfer - Panasonic KX-TD816 Installation Manual

P
P
ower Failure Restart
Description
Conditions
Programming References
Feature References
Operation References
P
ower Failure Transfer
Description
Conditions
3-96 Features
Turning back on the electricity, the system restarts the stored data
automatically. Before restarting, the system records the error logs
if necessary.
• In the case of KX-TD1232, if System Connection is established, the
Slave System makes a copy of the restored data of the Master system.
• In the event of a power failure, system memory is protected by the
factory-provided lithium battery. There is no memory loss except the
memories of Camp-On and Call Park.
No programming required.
None
Not applicable.
If a power failure should happen, or during a system-off-line state,
specific extension telephone instruments are automatically
connected straight to specific CO lines. This provides CO line
conversations between the following extensions and CO lines:
KX-TD816: CO 1 is connected to extension jack number 1
CO 2 is connected to extension jack number 2
CO 5 is connected to extension jack number 9
CO 6 is connected to extension jack number 10
KX-TD1232: CO 1 is connected to extension jack number 1
CO 2 is connected to extension jack number 2
CO 3 is connected to extension jack number 9
CO 4 is connected to extension jack number 10
CO 9 is connected to extension jack number 17
CO 10 is connected to extension jack number 18
Single line telephones can work in case of a power failure.
Connect these telephone instruments to the above extension jacks.
• All the other conversations except for the above combinations are
disconnected during a power failure.
• Only CO line conversations can operate. All the other features do not
work.
3 Features