Panasonic KX-TD816 Installation Manual page 260

4.2 Manager Programming
Conditions
Feature References
Date and Time Set
10. Press STORE.
11. Press NEXT.
Display example: 12:00
12. Enter the hour.
To change the current entry, press CLEAR and the new hour.
Press →.
13.
14. Enter the minute.
To change the current entry, press CLEAR and the new minutes.
Press →.
15.
16. Press SELECT for AM or PM.
17. Press STORE.
18. Press END.
• After changing an entry, you can press STORE. You do not have
to perform all of the rest of the steps.
• To go back to the previous field, press
13 through 16.
• If you hear the alarm after pressing STORE, check that the date is
valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave the entry empty.
Section 3, Features,
Display, Time and Date
(contd.)
AM
←
at steps 4 through 9 and steps
System Programming
000
4-15