2.3.10 Printer Connection - Panasonic KX-TD816 Installation Manual

2.3.10 Printer Connection

Notes
2-38 Installation
A user-supplied printer can be connected to the EIA (RS-232C)
Connector (25-pin) on the main unit. The printer is used to print
out SMDR call records and system programming data.
Connect the EIA (RS-232C) connector of the printer to the EIA
Connector.
EIA
Connector
Serial Interface (25-pin)
(RS-232C)
The KX-TD1232 is illustrated as a main unit.
Cables must be shielded and the maximum length is 2 m (6.5 feet).
Make cables so that the printer will be connected to the system as
shown in the chart on the following page.
The pin configuration of EIA (RS-232C) Connector is as follows:
Pin
Signal Name
No.
1 FG Frame Ground
2
SD (TXD) Transmitted Data
3 RD (RXD) Received Data
4
RS (RTS) Request To Send
5 CS (CTS) Clear To Send
6
DR (DSR) Data Set Ready
7 SG Signal Ground
8
CD (DCD) Data Carrier Detect
20 ER (DTR) Data Terminal
Ready
Serial Printer
Circuit Type
EIA CCITT
AA 101
BA 103
BB 104
CA 105
CB 106
CC 107
AB 102
CF 109
CD 108.2