Panasonic KX-TD816 Installation Manual page 96

2.4.7 Caller ID Card Installation
(2) Installing to the Optional 4-CO Line Unit
Note
Programming References
Feature References
2-64 Installation
The following procedures must be done before installing the 4-CO
Line Unit (KX-TD180) to the main unit.
1. Loosen five screws located on the rear of the 4-CO Line Unit.
2. Remove the back plate and take out the P-board.
3. Attach the Caller ID Card to the P-board, fitting the connectors.
4. Put the P-board back into the cabinet and fix the rear plate with
the five screws.
P-board
For installing the 4-CO Line Unit to the main unit, refer to Section 2.4.4
"Installing Expansion Unit (KX-TD170 / KX-TD180)."
Section 4, System Programming,
[110] Caller ID Code Set
[111] Caller ID Name Set
[406] Caller ID Assignment
Section 3, Features,
Caller ID
back plate
KX-TD193
Caller ID Card
CALLER ID