Busy Lamp Field; Busy Station Signaling (Bss) - Panasonic KX-TD816 Installation Manual

3 Features
B
usy Lamp Field
Description
Conditions
Programming References
Feature References
Operation References
B
usy Station Signaling (BSS)
Description
Conditions
Programming References
The LED (Light Emitting Diode) indicators of the DSS (Direct
Station Selection) buttons, each of which corresponds to a selected
extension, tell whether the corresponding extensions are idle or
busy.
• This function is available for DSS buttons on DSS Consoles and for
flexible CO buttons assigned as DSS buttons on proprietary telephones.
• A DSS button indicator lights red if the corresponding extension is
busy.
Section 4, System Programming,
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual,
Flexible Button Assignment – Direct Station Selection (DSS) Button
Section 3, Features,
Button, Direct Station
Selection (DSS)
Not applicable.
When attempting to call a busy extension, Busy Station Signaling
allows you to signal the user on the phone to answer your call.
The called extension user hears a Call Waiting tone and is able to
answer the call.
• This feature is effective if the called extension has enabled Call
Waiting. If Call Waiting is enabled, the caller will hear ringback tone;
if not, the caller will hear reorder tone.
• If the called party is provided with Off-Hook Call Announcement
(OHCA) function, the caller can announce the call through the speaker.
No programming required.
DSS Console (KX-T7240/
KX-T7040)
Features
B
3-13