Host Pbx Access - Panasonic KX-TD816NE Features Manual

1.1 General Features

Host PBX Access

Description
The system may be installed behind an existing host PBX. This is performed by connecting a
line from the host to a CO line in the Digital Super Hybrid System.
Conditions
• To enable Host PBX Access, put the host PBX line in a CO line group. The user accesses
the host PBX by selecting that CO line.
• A Host PBX Access Code is required to access CO lines of the host PBX.
• A pause, if programmed, can be inserted between the user-dialled Host PBX Access Code
and the following digits (Automatic Pause Insertion). Program the pause time required by
the Host PBX for that CO line group.
Programming Guide References
• [411] Host PBX Access Codes
Features Guide References
None
User Manual References
Not applicable.
128 Features Guide