Panasonic KX-TD816 Installation Manual page 115

3 Features
Conditions
Programming References
Feature References
Operation References
—User Manual
unless it has previously been stored in memory:
• Call Forwarding – to CO Line
• Last Number Redial
• Line Access
• One-Touch Dialing
• Pickup Dialing
• Saved Number Redial
• Station Speed Dialing
• System Speed Dialing
In Verified-Toll Restriction Override mode, the user can enter a
pre-assigned account code only when the user needs to override
toll restriction.
In Option mode, the user can enter any account code if needed.
• An account code can be stored into Memory Dialing (System / Station
Speed Dialing; One-Touch Dialing; Pickup Dialing; Call Forwarding –
to CO Line).
• The Account button may be used in place of the feature number. A
flexible button on the proprietary telephone set can be programmed as
the Account button.
• Account code entry after CPC detection must be done within 15
seconds. Otherwise, SMDR call record is activated and entry becomes
impossible afterwards.
• If disconnection signal is selected in program [990], field (3) and Flash
function is enabled in field (15), the Verified
allowed to make a CO call using the same line with Flash function.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Account code entry
[105] Account Codes
[508] Account Code Entry Mode
[990] System Additional Information, Fields (3), (15)
Station Programming.......................................................User Manual,
Flexible Button Assignment – Account Button
Section 3, Features,
Toll Restriction Override by Account Code Entry
DPT Features, SLT Features;
Account Code Entry
A
-
All Calls extension is
Features 3-3