Line Access, Co Line Group - Panasonic KX-TD816 Installation Manual

3 Features
Programming References
Feature References
Operation References
—User Manual
L
ine Access, CO Line Group
Description
Conditions
Programming References
CO button on a PT according to the priority:
S-CO > G-CO > L-CO on a hunted CO line group
• If Idle Line Preference – Outgoing is set on the telephone, the user can
access an idle line only by going off-hook.
• The system waits for a programmed time before dialing after a CO line
is seized.
Section 4, System Programming,
[100] Flexible Numbering, Automatic line access / ARS
[103] Automatic Access CO Line Group Assignment
[211] Dial Start Time
[400] CO Line Connection Assignment
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
Section 3, Features,
CO Line Connection Assignment – Outgoing
DPT Features, SLT Features;
Outward Dialing – Line Access, Automatic
Allows the extension user to dial access a CO line group. An idle
line is selected from the CO line group. To specify a CO line
group, dial the feature number (the default setting is "8") and a
desired CO line group number (1 through 8). A proprietary
telephone user can also specify a CO line group by pressing a
Group-CO button.
• Each extension is subject to System Programming items for CO lines
available to access.
• An idle line is selected in sequence from the lines in the specified CO
line group.
• Group-CO buttons must be programmed prior to use.
• If Idle Line Preference – Outgoing is set on the telephone, the user can
access an idle line only by going off-hook.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, CO line group line access
[211] Dial Start Time
L
Features 3-77