Host Pbx Access Codes - Panasonic KX-TA624 Installation Manual

403
Description
Selection
Default
Programming
4-64 System Programming
4.2

Host PBX Access Codes

Assigns Host PBX access codes. If the system is installed behind a
host PBX system, an access code is required to make an outside
call. Up to eight codes can be stored for an outside (CO) line
connected to the host PBX.
• Outside (CO) line number: 1 – 6,
• Access code: 1 or 2 digits, eight different entries (max.)
All outside (CO) lines – Not stored
1. Enter 403.
Display: Host PBX Access
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Not Stored
4. Enter an access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new access
code.
Display example: CO 1:01
5. To enter more access codes for the same outside (CO) line,
press "," (CONF/SAVE button) and enter the access codes
until all of the required entries are completed.
Display example: CO 1:01,08,10,22
6. Press STORE.
7. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
8. Repeat steps 4 through 7.
9. Press END.
System Programming
( = all outside (CO) lines)