Panasonic KX-TD816 Installation Manual page 348

4.8 Extension Programming
DIL 1:N Extension and Delayed Ringing — Day / Night
Conditions
Feature References
8. Repeat steps 4 through 7.
9. Press END.
• For KX-TD1232, this program has been modified from CO Line Group
basis to CO Line number basis. The current program is applicable to
ROM version P011J and ROM versions from P011N. Accordingly,
those ROM version models require the Version 2.xx software for
EIA/Remote Programming and Diagnosis. Other ROM version models
require the Version 1.xx software. Confirm the ROM version of your
main unit ([116] "ROM Version Display").
• For KX-TD816, this program is applicable to all ROM version
models, and all ROM version models require the Version 2.xx
software for EIA/Remote Programming and Diagnosis.
• An extension can be assigned as the destination of as many CO lines
as is required.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
• To assign all jacks or all CO lines to one selection, press the
step 3 or step 4. In these cases, the display shows the contents
programmed for Jack 01 or for CO line 01.
• There are six notification methods:
(1) Immediate ringing: rings immediately
(2) 1 ring delay
(3) 3 rings delay
(4) 6 rings delay
(5) No ring: only the indicator flashes
(6) Disable: no incoming call
• When you change the jack number by pressing NEXT or PREV, the
CO line number is not changed. Example #03-1:CO06.....Press
NEXT.....#03-2:CO06
Section 3, Features,
Direct In Lines (DIL)
Night Service
Ringing, Delayed
System Programming and Diagnosis with Personal Computer
603-604
System Programming
(contd.)
key at
4-105