Call Forwarding - No Answer Time - Panasonic KX-TD816 Installation Manual

202
Call Forwarding – No Answer Time
Description
Selection
Default
Programming
Conditions
Feature References
4-52 System Programming
4.4
Sets the number of rings for the Call Forwarding – No Answer
feature. If a call is not answered before the programmed number of
rings, the call is forwarded to the destination.
Number of rings: 1 through 12
3 rings
1. Enter 202.
Display: No Answer Time
2. Press NEXT.
Display example: Time: 3 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and the new number of
rings.
4. Press STORE.
5. Press END.
• One ring is equivalent to five seconds.
• This timer is also used for Intercept Routing. If an incoming DISA*
call to the Intercept Routing destination is not answered before this
timer expires, the call will be disconnected.
• You cannot leave the entry empty.
Section 3, Features,
Call Forwarding – Busy / No Answer
Call Forwarding – No Answer
Timer Programming
*: Available for KX-TD1232 only.