Panasonic KX-TD816 Installation Manual page 371

990
System Additional Information
Field
(11) If an outside party is transferred and
unanswered, assigns whether Transfer
Recall occurs at the transfer originating
extension or at Operator 1.
(12) If Limited Call Duration is enabled in
program [502] "Extension-to-CO Line Call
Duration Limit," assigns if Limited Call
Duration is done for both outgoing and
incoming calls or for outgoing calls only.
(13) Allows you to remove confirmation tone 4.
By default, a beep tone sounds when a
three-party conference is started / ended.
(14) Determines if the dialed " " and "#" will
be checked by Toll Restriction. This
assignment is required for certain central
offices (CO) to prevent toll fraud. Some
CO ignore the user-dialed " " and "#". If
your CO is such a type, select "0" (no
check).
(15) Enables or disables the Flash function when
receiving a CO call at a locked or toll-
restricted station. Flash, if enabled, allows
the user to make a CO call using the same
line at the station. This is also allowed for
those extensions that have Account Code –
Verified – All Calls mode assigned, if "0"
(disconnection signal) is selected in field (3)
above.
(16) Allows you to remove Confirmation Tone 3.
This tone is sent when a conversation is
established just after dialing the feature
numbers for accessing the following
features: Call Pickup, Paging, Paging
Answer, TAFAS Answer, Hold Retrieve and
Call Park Retrieve.
(17) A CO line set to pulse or call blocking mode
in program [402] "Dial Mode Selection" can
have two settings. This assigns the pulse
break ratio during dial pulsing. Select an
appropriate ratio depending on the standard
in your country.
4-128 System Programming
4.10
Description
Option Programming
(contd.)
Selection Default
0 : extension
1 : Operator 1
0 : both calls
1 : outgoing calls
only
0 : disable
1 : enable
0 : no check
1 : check
0 : disable
1 : enable
0 : disable
1 : enable
0 for KX-TD
0 : 60 %
816C/HK/NL
1 : 67 %
KX-TD1232
C/HK/NL
1 for KX-TD
816BX/ML/
NZ/X, KX-TD
1232BX/ML/
NZ/X
References
0 Call Transfer,
Unscreened – to
Extension
0 Limited Call
Duration
1 Confirmation
Tone
1 Toll Restriction
0 Flash
1 Confirmation
Tone
Dial Type
Selection