331
Description
Selection
Default
Programming
Conditions
Feature References
4-76
System Programming
4.5
TRS / ARS Programming
ARS Modify Added Number
Determines how the dialed number should be modified before
sending to the central office. Digits are added to the beginning of
the dialed number.
• Modification table number: 1 through 8
• Number to be added: 20 digits (max.)
All modification tables – Not stored
1.
Enter 331.
Display: ARS Modify Add
2.
Press NEXT.
Display: Modify Table?->
3.
Enter a modification table number.
To enter table number 1, you can also press NEXT.
Display example:1:
4.
Enter the number to be added.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another modification table, press NEXT or
PREV, or SELECT and the desired modification table
number.
7.
Repeat steps 4 through 6.
8.
Press END.
• There is a maximum of eight Modification Tables, each of which can be
given a number to be added.
• Each number has a maximum of 20 digits, consisting of 0 through 9,
, #, and PAUSE.
Section 3, Features,
Automatic Route Selection (ARS)