2.6
Starting the System for the First Time
KX-TD1232
Power Indicator
CAUTION: Once you start up the system and if you turn the power off, do not perform the
above procedures to start the system again. Otherwise, your programmed data is
cleared. To start the system, just turn the Power Switch on.
The power socket wall outlet should be located near this equipment and be easily
accessible.
Notice
• After pressing the Reset Button, slide the System Clear Switch to the
"NORMAL" position at step 6 while the power indicator is flashing
(approximately within 10 seconds). Otherwise, the system does not
start up with the default values.
SYSTEM
CLEAR
CLEAR
NORMAL
RESET
Power
Switch
Installation
System Clear
Switch
Reset Button
To AC Outlet
2-77