One-Touch Transfer By Dss Button; Operator - Panasonic KX-TD816 Installation Manual

O
Operation References
—User Manual
O
ne-Touch Transfer by DSS Button
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
O
perator
Description
3-88 Features
DPT Features,
One Touch Dialing
DSS Console Features,
One Touch Dialing
One-Touch Access for System Features
This feature, if programmed, allows the DSS Console and the
proprietary telephone user to hold a CO call and quickly transfer it
to an extension. While talking to an outside party, pressing a DSS
button on the console or the proprietary telephone provides
automatic hold and transfer. There is no need to press the
TRANSFER button. The extension starts ringing immediately.
• One-Touch Transfer cannot be performed when there is another call on
Consultation Hold.
• If One-Touch Transfer mode is disabled, the user transfers a CO call by
pressing the TRANSFER button followed by the DSS button.
Section 4, System Programming,

[108] One-Touch Transfer by DSS Button

Section 3, Features,
Button, Direct Station Selection
(DSS)
DPT Features,
Call Transfer — to Extension
DSS Console Features,
Call Transfer
The system supports up to two operators. Any extension can be
appointed as an operator.
The extension assigned as Operator 1 has the ability to perform the
following operations:
• Switching Day / Night mode manually
• Setting / clearing station lockout remotely
3 Features