Call Hold - Co Line - Panasonic KX-TD816 Installation Manual

C
Programming References
Feature References
Operation References
—User Manual
C
all Hold – CO Line
Description
Conditions
Programming References
3-26 Features
• If a call between an extension and an outside party is established by
this feature, the duration of the call period can be restricted depending
on the setting of a system timer. If a call between two outside parties is
established by this feature, the duration of the call is determined by
another system timer. Alarm tone is generated to both outside parties
15 seconds before the time-out. The call is disconnected at the time-
out.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb set / cancel
[205] Extension-to-CO Line Call Duration Time
[206] CO-to-CO Call Duration Time
[502] Extension-to-CO Line Call Duration Limit
[504] Call Forwarding to CO Line
Station Programming.......................................................User Manual,
Flexible Button Assignment – FWD/DND Button
Section 3, Features,
Limited Call Duration
DPT Features, SLT Features;
Call Forwarding — to CO Line
Allows the extension user to put a CO call on hold. The held call
can be retrieved from the user who held it or from any other
extension.
• With a single line telephone, the user can hold only one call whether it
is an extension or CO call.
• Music is sent to the party on hold, if available (Music on Hold).
• If a call on hold is not retrieved in a specific period of time, Hold
Recall results.
• If an outside party is placed on hold and not retrieved in 30 minutes, it
is automatically disconnected.
[100] Flexible Numbering, Call hold
[200] Hold Recall Time
3 Features