107
Description
Selection
Default
Programming
Conditions
Feature References
4-38
System Programming
4.3
System Programming
System Password
Assigns the password required for entering System Programming
mode and for maintenance from a personal computer.
Password: 4 through 7 digits
1234
1.
Enter 107.
Display: System Password
2.
Press NEXT.
Display: Password:1234
3.
Enter a password.
To change the current entry, press CLEAR and the new password.
4.
Press STORE.
5.
Press END.
• The password can be from four to seven digits long. The valid numbers
are from 0 through 9.
• If less than four digits are entered, they are not stored.
• You cannot leave the entry empty.
Section 3, Features,
System Programming and Diagnosis with Personal Computer
System Programming with Proprietary Telephone