Panasonic KX-TD816 Installation Manual page 330

4.5 CO Line Programming
Conditions
Feature References
Host PBX Access Codes
• This program is only required if a host PBX or Centrex line is
connected to the system. Program [401] "CO Line Group Assignment"
is used to assign the line to a CO line group.
• There is a maximum of four access codes per CO line group. Each
code has one or two digits, consisting of 0 through 9 and
• If conflicting access codes (such as 8 and 81) are stored for the same
CO line group, the 1-digit code (8) only will be in effect.
• When the programmed codes are dialed, Automatic Pause Insertion and
Toll Restriction are applied to the calls. The programmed pause time
(in program [412] "Pause Time") is automatically inserted after the
access code.
• To assign all CO line groups to one selection, press the
In this case, the display shows the contents programmed for CO line
group 1.
Section 3, Features,
External Feature Access
Host PBX Access
(contd.)
Pause Insertion, Automatic
System Programming
411
.
key at step 3.
4-87