Co Line Group - Panasonic KX-TD816 Installation Manual

C
C
O Line Group
Description
Conditions
Programming References
Feature References
Operation References
3-40 Features
CO lines can be grouped into up to eight CO line groups (for
example, WATS, DDD, FX services, etc). This allows extensions
to call outside parties without designating a specific CO line, since
a CO line is automatically selected from the designated CO line
group. All CO lines belonging to a CO line group follow the
assignment determined for that CO line group. A list of
assignments for each CO line group is shown as follows:
• The destination of Intercept Routing
• Disconnect Time
• Flash Time
• Host PBX Access Code
• Pause Time (used in Speed Dialing and Flash)
• Each CO line can only belong to one CO line group.
• CO lines in a CO line group are selected uniformly if all lines belong to
the same system.
• If System Connection* is employed, a CO line group can include CO
lines in both systems. In this case, a CO line is first selected from the
user's system. If all lines in the user's system are in use, a line in the
other system is selected.
Section 4, System Programming,
[401] CO Line Group Assignment
[409]–[410] Intercept Extension — Day / Night
[411] Host PBX Access Codes
[412] Pause Time
[413] Flash Time
[414] Disconnect Time
None
Not applicable.
3 Features
*: Available for KX-TD1232 only.