2.3.2 Co Line Connection - Panasonic KX-TD816 Installation Manual

2.3.2 CO Line Connection

(KX-TD816: CO1 through CO4, KX-TD1232: CO1 through CO8)
1. Using 4-pin Connector (for KX-TD816BX./HK/ML, KX-TD1232BX/DX)
Wire Specifications
Connection
4-pin plug
2-16 Installation
There are two methods to perform CO Line Connection, using a 4-
pin connector and a modular connector. Which method should be
used depends on the model number of the system as shown below.
Model number
KX-TD816BX/HK/ML
KX-TD1232DBX/DX
KX-TD816C/NL/NZ
KX-TD1232BX/C/HK/ML/NL/NZ/X
Use 4-pin plugs (included) to connect CO lines.
Wire
Diameter of conductor
Diameter including coating
Use 4-pin plugs (included) to connect CO lines.
There are two plugs to connect four CO lines for KX-TD816, and
four plugs to connect eight CO lines for KX-TD1232. A plug is able
to connect two CO lines. Use twisted pair cable.
1. Insert required telephone wires into the holes in a plug.
Fix the transparent part into the black part.
Notes: Do not peel off the coating of the wires. Insert the wires to the
ends.
T
R
T
R
Connector to be used
4-pin Connector
Modular Connector
Solid wire
ø0.4 – ø0.65 mm (22, 24, 26AWG)
ø0.66 – ø1.05 mm