Panasonic KX-TD816 Installation Manual page 316

4.5 TRS / ARS Programming
Description
Selection
Default
Programming
Conditions
ARS Routing Plans 1 through 8
Assigns the CO line group and modification plan to be used for
each route plan and time schedule.
Program: [322] [323] [324] [325] [326] [327] [328] [329]
Plan: 1
• Time schedule: A / B / C / D
• CO line group number: 1 through 8
• Modification table number: 1 through 8
All time schedules – Not stored
1. Enter a program address (322 through 329).
Display example: ARS Route PL-1
2. Press NEXT to program time schedule A.
To program another time schedule, keep pressing NEXT or PREV
until the desired time schedule is displayed.
Display example: A:G
3. Enter a CO line group number.
To delete the current entry, press CLEAR.
To change the current entry, enter the new number.
Press → to enter the paired modification table number.
4.
5. Enter a modification table number.
To delete the current entry, press CLEAR.
To change the current entry, enter the new modification table number.
Press → to enter the next priority CO line group number.
6.
7. Repeat steps 3 through 6 to enter other CO line group
numbers and modification table numbers.
8. Press STORE.
9. To program another time schedule, keep pressing NEXT or
PREV until the desired time schedule is displayed.
10. Repeat steps 3 through 9.
11. Press END.
• Up to three CO line groups and modification plans can be assigned for
2 3 4 5
M , G
System Programming
322-329
6 7 8
M , G M
4-73