4.8
Extension Programming
Outgoing Permitted CO Line Assignment — Day / Night
Conditions
Feature References
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
• To assign all jacks or all CO lines to one selection, press the
step 3 or 4. In these cases, the display shows the contents programmed
for Jack 01 or CO01.
• To assign no CO line group for a station, press CLEAR at step 4.
Section 3, Features,
CO Line Connection Assignment – Outgoing
Night Service
605-606
(contd.)
System Programming
key at
4-107