Redial, Last Number - Panasonic KX-TD816 Installation Manual

3 Features
Conditions
Programming References
Feature References
Operation References
—User Manual
R
edial, Last Number
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
• Redial Repeat Time and Interval Time can be changed by System
Programming.
• Pressing FLASH allows the system to cancel this feature.
• If any dialing operation is done during Automatic Redial, this function
is finished.
• This feature is not available with KX-T7055 or KX-T7250.
• This feature is not available with KX-TD816NL/1232NL.
Section 4, System Programming,
[209] Automatic Redial Repeat Times
[210] Automatic Redial Interval Time
Section 3, Features,

Redial, Last Number

Special Features for KX-T7235 – Call Log
DPT Features,
Redial, Automatic
Every telephone in the system automatically saves the last
telephone number dialed to a CO line and allows the extension
user to dial the same number again.
• With a proprietary telephone, REDIAL button is used to carry out Last
Number Redial. With a single line telephone, the feature number is
used.
• The memorized telephone number is replaced by a new one if at least
one digit to be sent to a CO line is dialed. Dialing a CO line access
code alone does not change the memorized number.
• Certain type of proprietary telephones allows multiple redialing
automatically (Automatic Redial).
Section 4, System Programming,
[100] Flexible Numbering, Last number redial
Section 3, Features,
Redial, Automatic
DPT Features, SLT Features;
Redial, Last Number
Redial, Saved Number
Features
R
3-99