Lockout - Panasonic KX-TD816 Installation Manual

3 Features
Programming References
Feature References
Operation References
—User Manual
L
ockout
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
• The user can override the Idle / Prime Line Preference temporarily to
select a specific line. To select it, press the desired line access button
(INTERCOM or CO button) before going off-hook or pressing the SP-
PHONE / MONITOR button; or if Full One-Touch Dialing is enabled,
press One-Touch Dialing, DSS, REDIAL, or SAVE button.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[103] Automatic Access CO Line Group Assignment
[400] CO Line Connection Assignment
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
Station Programming.......................................................User Manual
Flexible Button Assignment – Group-CO (G-CO) Button, Loop-CO (L-
CO) Button, Single-CO (S-CO) Button
Preferred Line Assignment – Outgoing
Section 3, Features,
CO Line Connection Assignment – Outgoing
Basic Operation,
Making Calls
If one party in a conversation goes on-hook, they are both
disconnected from the speech path automatically. This feature
applies to extension and CO calls. Reorder tone is sent to the
off-hook party before it is disconnected.
In the case of a single line telephone (SLT), if nothing is dialed within a
certain period of time after the other party goes on-hook, reorder tone is
sent to the SLT and then it is disconnected from the speech path.
No programming required.
None
DPT Features, SLT Features;

Lockout

L
Features 3-81