Do Not Disturb Override - Panasonic KX-TD816 Installation Manual

4.7 COS Programming
Description
Selection
Default
Programming
Conditions
Feature References

Do Not Disturb Override

This program determines which Classes of Services (COS) are
allowed to perform Do Not Disturb (DND) Override.
• COS number: 1 through 8,
• Disable / Enable
All COS – Disable
1. Enter 507.
Display: DND Override
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features,
Do Not Disturb (DND) Override
( =all COS)
key at step 3. In this
System Programming
507
4-99