Disa User Codes - Panasonic KX-TD816 Installation Manual

4.9 Resource Programming
Description
Selection
Default
Programming
Conditions
Feature References
*: Available for KX-TD1232 only.

DISA User Codes*

Assigns the DISA User Codes and assigns a Class of Service
(COS) to each code. The COS of the code determines the toll
restriction level of the DISA caller.
• DISA user code number: 1 through 4
• DISA user code: 4 digits
• COS number: 1 through 8
Code 1=1111 – COS 1;
Code 2=2222 – COS 1;
1. Enter 811.
Display: DISA User Code
2. Press NEXT.
Display: User Code NO?->
3. Enter a DISA user code number.
To enter user code number 1, you can also press NEXT.
Display example Code1:1111 COS:1
4. Enter a DISA user code.
To change the current entry, enter the new code.
→ to program COS.
5. Press
6. Enter a COS number.
To change the current entry, enter the new COS number.
7. Press STORE.
8. To program another user code, press NEXT or PREV, or
SELECT and the desired DISA user code number.
9. Repeat steps 4 through 8.
10. Press END.
• This setting is required if Trunk (CO line) Security mode is selected in
program [809] "DISA Security Type."
• There are four programmable user codes. Each code should be unique,
composed of four numerical digits, 0 through 9.
• You cannot leave the entry empty.
Section 3, Features,
Direct Inward System Access (DISA)
Code 3=3333 – COS 1;
Code 4=4444 – COS 1
System Programming
811
4-121