3
Features
P
aging – Group
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
P
aralleled Telephone
Description
Conditions
Allows you to select an extension group and make a voice
announcement. All the proprietary telephones in the group will
receive the page. If a member of the paged group answers your
paging, you can talk to the person through the connected line.
To select all groups pages all extensions.
•
• Confirmation tone is sent when the page is made or answered.
Eliminating the tone is programmable.
Section 4, System Programming,
[100] Flexible Numbering, Paging – group, Paging – group answer
[990] System Additional Information, Field (16)
Section 3, Features,
Extension Group
DPT Features, SLT Features;
Paging — Group
Paging — ANSWER
Paging and Transfer
Any proprietary telephone can be connected in parallel with a
single line telephone. The following two combinations of
telephones are available:
(1)APT + SLT (an analog proprietary telephone and a single
line telephone/device)
(2)DPT + SLT (a digital proprietary telephone and a single
line telephone/device)
When a parallel connection is made, an extension user can make
and answer a call using either telephone.
• The proprietary telephone (PT) can be used to perform normal
operations whether or not the SLT is enabled.
• In the SLT + DPT combination, if one telephone goes off-hook while
the other telephone is on a call, the call is switched to the former.
• In the SLT + APT combination, if one telephone goes off-hook while
the other telephone is on a call, a three-party call is established. If one
P
Features
3-93